H3C GB0-371-ENU : Constructing H3C High-Performance Campus Networks

Best quality for better preparation

The best valid and most accurate GB0-371-ENU study material can facilitate your actual test and save your time and money. Generally, you are confused by various study material for GB0-371-ENU exam preparation. Now, please pay attention to GB0-371-ENU pattern reliable study material, which is the best validity and authority training material for your preparation. The GB0-371-ENU latest practice dumps will bring you full scores.

We have created professional and conscientious IT team, devoting to the research of the IT technology, focusing on implementing and troubleshooting. GB0-371-ENU test camp dumps are the days & nights efforts of the experts who refer to the IT authority data, summarize from the previous actual test and analysis from lots of practice data. So the authority and validity of GB0-371-ENU updated study material are without any doubt. You can pass your GB0-371-ENU updated study material at first attempt.

GB0-371-ENU latest cram material covers all the sections of the actual exam. The GB0-371-ENU practice exam online has the questions very similar to the actual exam, and all the H3CSE-Routing & Switching GB0-371-ENU online answers are checked and confirmed by our professional expert. Our GB0-371-ENU study pdf is especially designed to give you a unique experience and make sure your success pass.

Good service

We truly treat our customers with the best quality service and the most comprehensive GB0-371-ENU exam study pdf, that's why we enjoy great popularity among most workers. When you want to learn something about the GB0-371-ENU valid study guide, our customer assisting will be available for you. We will offer you the best preparation materials regarding H3C GB0-371-ENU study guide practice exam. You can totally trust our dumps and service.

Our senior experts have developed exercises and answers about GB0-371-ENU exam dumps with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use GB0-371-ENU training pdf, we can help you 100% pass your first time to attend actual exam. If you fail the exam, we will give a full refund to you.

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Passing GB0-371-ENU is not simple. Choose the right training is the first step to your success and choose a good resource of information is your guarantee of success. While GB0-371-ENU training material is a good guarantee of the resource of information. If you choose the GB0-371-ENU updated study material, it not only can guarantee you to pass GB0-371-ENU actual exam but also provide you with a year-long free update. Our GB0-371-ENU updated training material has the advantage to help you pass the actual test.

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

Question 1

In the networking shown in the figure, the interconnection lines between RT1, RT2, RT3, and RT4 are all 1000M links except the shared Ethernet part which is a 10M link. The OSPF protocol is run to enable routing to communicate with these 4 routers. Both run PIMSM protocol, RP is 1.1.1.1, receivers are connected to the downstream interfaces of RT1 and RT2, and IGMP is enabled on the corresponding interfaces. Then, when the receiver sends a group join request, which of the following routers are connected (*, G) entry exists?

A. RT3
B. RT1
C. RT4
D. RT2

Question 2

In the switching network as shown in the figure, all three switches only have the default VLAN1, the interconnection ports of the three switches are trunks, and all VLANs are allowed to pass, and the three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet1/0/1 port on the switch SWA is set to Fixed, and the VLAN existing on the SWA is executed on the display vlan SWA (select one or Multiple)

A. VLAN1
B. VLAN20
C. VLAN 10

Question 3

Regarding the generation of TCNBPDU, the following statements are correct

A. STP-enabled non-root bridge switch If a port is connected to a PC, when the port enters the Forwarding switch, it will not produce TCN BPDU
B. If the alternate port of a switch in the network is down, the switch will not generate TCN BPDUs
C. When a port of the switch is selected as the designated port or root port, the switch will immediately send TCNBPDU
D. If the designated port link of a switch in the network is broken, the switch must generate TCNBPDU

Question 4

As shown in the network, the switches all run RSTP. Initially, SWA, SWB and SWC are interconnected through links 1, 2, and 3. When the following changes occur in the network connection, the correct statement is:

A. As shown in the figure, when SWB is connected to another switch SWD running RSTP, SWB will send RSTBPDU with TC set
B. When SWC edge port E0/1 is connected to a PC, SWC will send RST BPDU with TC set
C. As shown in the figure, when SWB is connected to another switch running RSTP, SWD will send RSTBPDU with TC set.
D. When the link between SWB and SWC is down, both SWB and SWC will send RST BPDU with TC set

Question 5

The connection form of switch SWA, SWB and SWC is as follows:
SWA--SWB--SWC
The three switches are correctly configured with the GVRP protocol to advertise VLAN information to each other. If VLAN 2 is manually created on SWA, the following description is correct

A. SWA waits for the Holdtimer time to send the first Join message to SWB, and then waits for the Jointime time to send the second Join message
B. SWA immediately sends the first Join message to SWB, and then waits for the Jointimer time to send the second Join message
C. After SWB receives the first Join message, Ma I sends the first Join message to SWC, and then waits for Jointime to send the second Join message
D. After receiving the first Join message, SWB waits for the Holdtimer time to send the first Join message to SWC, and then waits for the Jointimer time to send the second Join message

Solutions: