Real FCSS_NST_SE-7.4 dumps Accurate Questions and Answers with Free and Fast Updates
Real FCSS_NST_SE-7.4 Quesions Pass Certification Exams Easily
Fortinet FCSS_NST_SE-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 29
Which two statements about Security Fabric communications are true? (Choose two.)
- A. FortiTelemetry must be manually enabled on the FortiGate interface.
- B. The default port for Neighbor Discovery can be modified.
- C. By default, the downstream FortiGate establishes a connection with the upstream FortiGate using TCP port 8013.
- D. FortiTelemetry and Neighbor Discovery both operate using TCP.
Answer: A,C
NEW QUESTION # 30
Refer to the exhibit.
The exhibit shows the output from using the command diagnose debug application samld -1 to diagnose a SAML connection.
Based on this output, what can you conclude?
- A. The IdP IP address is 10.1.10.254.
- B. The authentication request is for an SSL VPN connection.
- C. The IdP IP address is 10.1.10.2.
- D. Active Directory is used for authentication.
Answer: C
NEW QUESTION # 31
Refer to the exhibits.
An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table. What is the most likely cause of this issue?
- A. The administrator has misconfigured redistribution of routes on FGT-A.
- B. FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.
- C. FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.
- D. A batter route to the 8.8.8.8/32 network exists in the routing table.
Answer: C
NEW QUESTION # 32
Refer to the exhibits, which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovers that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must the administrator make to fix the issue? (Choose two.)
- A. Use different pre-shared keys on both VPNs.
- B. Enable XAuth on both VPNs.
- C. Change to aggressive mode on both VPNs.
- D. Set up specific peer IDs on both VPNs.
Answer: C,D
NEW QUESTION # 33
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate?
(Choose two.)
- A. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- B. The heartbeat messages must be manually enabled on FortiGate.
- C. The heartbeat messages can be seen in the collector agent logs.
- D. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
Answer: A,C
NEW QUESTION # 34
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate? (Choose two.)
- A. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- B. The heartbeat messages must be manually enabled on FortiGate.
- C. The heartbeat messages can be seen in the collector agent logs.
- D. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
Answer: A,C
NEW QUESTION # 35
What are two reasons you might see iprope_in_check() check failed, drop when using the debug flow? (Choose two.)
- A. Packet was dropped because of traffic shaping.
- B. Packet was dropped because of policy route misconfiguration.
- C. VIP or IP pool misconfiguration.
- D. Trusted host list misconfiguration.
Answer: C,D
NEW QUESTION # 36
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. An SD-WAN rule
- B. An ISDB route
- C. A regular policy route
- D. A regular policy route, which is associated with an active static route in the FIB
Answer: B
NEW QUESTION # 37
Exhibit.
Refer to the exhibit, which contains a screenshot of some phase 1 settings.
The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:
However, the IKE real-time debug does not show any output. Why?
- A. The log-filter setting is incorrect. The VPN traffic does not match this filter.
- B. The administrator must also run the command diagnose debug enable.
- C. The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.
- D. Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.
Answer: B
NEW QUESTION # 38
Refer to the exhibit, which shows the output of a BGP debug command.
What can you conclude about the router in this scenario?
- A. All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.
- B. The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.
- C. The BGP session with peer 10.127.0.75 is up.
- D. An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.
Answer: C
NEW QUESTION # 39
Which two statements about conserve mode are true? (Choose two.)
- A. FortiGate exits conserve mode when the system memory goes below the configured green threshold.
- B. FortiGate enters conserve mode when the system memory reaches the configured extreme threshold.
- C. FortiGate starts dropping all new sessions when the system memory reaches the configured red threshold.
- D. FortiGate starts taking the configured action for new sessions requiring content inspection when the system memory reaches the configured red threshold.
Answer: A,D
NEW QUESTION # 40
Refer to the exhibit, which shows a session entry.
Which statement about this session is true?
- A. Return traffic to the initiator is sent to 10.1.0.1.
- B. Return traffic to the initiator is sent lo 10.200.1.254.
- C. It is an ICMP session from 10.1.10.1 to 10.200.5.1.
- D. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
Answer: C
NEW QUESTION # 41
Refer to the exhibit, which shows the output of the command get router info ospf neighbor.
To what extent does FortiGate operate when looking at its OSPF neighbors? (Choose two.)
- A. The local FortiGate has at least one interface that participates in a broadcast network.
- B. The local FortiGate has at least one interface that participates in a point-to-point network.
- C. Neighbor 0.0.0.18 is the designated router (DR).
- D. The local FortiGate is the DR.
Answer: A,B
Explanation:
The command on this slide shows a summary of the statuses of all the OSPF neighbors. For each neighbor, it displays the adjacency state and if it is a DR, a BDR, or neither (DROther) Pagina 362 Enterprise_Firewall_7.2_Study. - Point-to-point networks contain only two peers, one at each end of a point-to-point link - Broadcast networks (multi-access) support more than two attached routers. They also support sending messages to multiple recipients (broadcasting). Pagina 365 Enterprise_Firewall_7.2_Study. In any multi-access network there is one DR and one BDR. Pagina 439 Network_Security_Support_Engineer_7.4_Study FULL/- This represents a point-to-point network
NEW QUESTION # 42
Refer to the exhibit, which shows the output of a debug command.
Which two statements about the output are true? (Choose two.)
- A. There are a total of five OSPF routers attached to the vorz4 network segment
- B. In the network connected to port4, two OSPF routers are down.
- C. The interlace is part of the OSPF backbone area.
- D. One of the neighbors has a router ID of 0.0.0.4.
Answer: B,C
NEW QUESTION # 43
Exhibit.
Refer to the exhibit, which shows a partial web fillet profile configuration.
Which action does FortiGate lake if a user attempts to access www. dropbox. com, which is categorized as File Sharing and Storage?
- A. FortiGate exempts the connection, based on the Web Content Filter configuration.
- B. FortiGate blocks the connection as an invalid URL.
- C. FortiGate blocks the connection, based on the FortiGuard category based filter configuration.
- D. FortiGate allows the connection, based on the URL Filter configuration.
Answer: C
NEW QUESTION # 44
Which statement about parallel path processing is correct (PPP)?
- A. PPP does not apply to packets that are part of an already established session.
- B. Software configuration has no impact on PPP.
- C. Only FortiGate hardware configurations affect the path that a packet takes.
- D. PPP chooses froma group of parallel options lo identity the optimal path tor processing a packet.
Answer: D
NEW QUESTION # 45
Refer to the exhibit.
Which three pieces of information does the diagnose sys top command provide? (Choose three.)
- A. The cmdbsvr process is occupying 2.4% of the total user memory space.
- B. The miglogd daemon is running on CPU core ID 0.
- C. If the neweli daemon continues to be in the R state, it will need to be manually restarted.
- D. The diagnose sys top command has been running for 18 minutes.
- E. The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.
Answer: A,B,E
NEW QUESTION # 46
......
FCSS_NST_SE-7.4 Dumps are Available for Instant Access: https://realtest.free4torrent.com/FCSS_NST_SE-7.4-valid-dumps-torrent.html