Verified 1Z0-947 Dumps Q&As - 1Z0-947 Test Engine with Correct Answers
Pass Your 1Z0-947 Dumps as PDF Updated on 2026 With 147 Questions
NEW QUESTION # 60
You want to eliminate the reporting output from processing a Macro. How should you proceed?
- A. Use the optional parameter NOREPORT.
- B. Use the optional parameter UNLIST.
- C. Use the optional parameter NOMACROOUTPUT.
- D. Use the optional parameter NOLIST.
Answer: D
Explanation:
The NOLIST parameter is used in Oracle GoldenGate to suppress the listing of macros and included parameter files in the process report file. This is particularly useful when including long macro libraries to keep the report concise.
NEW QUESTION # 61
Which is an incorrect option to use with the DBOPTIONS parameter for a Replicat?
- A. NOCATALOGCONNECT
- B. USEODBC
- C. USEREPLICATIONUSER
- D. BATCHSQL
Answer: D
Explanation:
BATCHSQL is the incorrect option to use with the DBOPTIONS parameter, because it is not a DBOPTIONS sub-option at all - it's a standalone parameter.
NEW QUESTION # 62
What detailed information does the Network Statistics tab of the Receiver Server provide for the Data Path configured?
- A. The host of the sender and the Distribution Path
- B. The transfer network protocol
- C. The total write time
- D. The IP Address of the sender and the Distribution Path
Answer: A
Explanation:
The Network Statistics tab in the Receiver Server UI displays details about the host of the sender and the configured Distribution Path, which helps in monitoring and troubleshooting replication data flow paths in Oracle GoldenGate Microservices.
NEW QUESTION # 63
Which transactions are captured if you ADD EXTRACT with BEGIN NOW at 1:00 PM, but START EXTRACT at 2:00 PM?
- A. Transactions that started at or after 1:00 PM
- B. Only transactions that started before 1:00 PM and committed after 1:00 PM
- C. Only transactions that started at or after 2:00 PM
- D. Transactions that started before 1:00 PM and committed after 2:00 PM
Answer: A
Explanation:
When you run ADD EXTRACT ... BEGIN NOW at 1:00 PM, GoldenGate records the current CSN/SCN as the starting point. So even if you start the Extract later (e.g., at 2:00 PM), it will capture transactions that started at or after 1:00 PM, ensuring no changes are missed from the defined start point.
NEW QUESTION # 64
If you were to create a target-initiated Distribution Path, which of the following must you provide?
- A. The name of the GoldenGate deployment
- B. The name of the database transaction logs where database data changes were recorded
- C. The name of the Extract
- D. The target URI
Answer: D
Explanation:
When creating a target-initiated Distribution Path in Oracle GoldenGate Microservices, the Receiver Service initiates the connection to the source's Distribution Service. This requires specifying the target URI, which includes details like the source host, port number, and trail name. The Extract name is not directly required in this configuration.
NEW QUESTION # 65
Which database setting for the Oracle 19c database is required to enable Oracle GoldenGate?
- A. ENABLE_DATABASE_REPLICATION=true
- B. ENABLE_GOLDENGATE_REPLICATION=true
- C. ENABLE_STREAMS_REPLICATION=true
- D. Configure the STREAMS_POOL_SIZE database parameter
Answer: B
Explanation:
To enable Oracle GoldenGate in Oracle 19c, set ENABLE_GOLDENGATE_REPLICATION=TRUE, which allows the database to support GoldenGate features like Integrated Extract and Replicat.
NEW QUESTION # 66
To display SQL DML statements before execution using a classic Replicat, what should you do?
- A. None of the above
- B. Execute ScanForRBA
- C. Execute Detail On
- D. Enable the ShowSyntax parameter
Answer: D
Explanation:
ShowSyntax displays SQL before execution.
NEW QUESTION # 67
Which file is required if you're doing column mapping on the source system only?
- A. Source-definitions file
- B. Replicat parameter file
- C. Extract parameter file
- D. Target-definitions file
Answer: A
Explanation:
Use a source definition file when doing mapping at source.
NEW QUESTION # 68
You have configured and added the Extract and Replicat tasks by using the Direct Load method. What do you need to do to get the processes up and running?
- A. Start the Extract task and then start the Replicat task
- B. Start the Replicat task
- C. Start the Extract task, wait for it to stop, and then start the Replicat task
- D. Start the Extract task
Answer: C
Explanation:
In the Direct Load method, the Extract performs a one-time data load and then stops. Only after that should the Replicat be started to apply the loaded data. Starting both simultaneously is not valid for this method.
NEW QUESTION # 69
Which Oracle GoldenGate utility helps troubleshoot OGG-02191 Incompatible Record errors?
- A. The reverse utility
- B. The CONVCHK utility
- C. The logdump utility
Answer: C
Explanation:
logdump is used to inspect trail file record structure.
NEW QUESTION # 70
Oracle GoldenGate Software Command Interface (GGSCI) is the Oracle GoldenGate command-line utility. You use GGSCI commands to configure, control, and monitor Oracle GoldenGate. GGSCI commands can be collected in a text script called an Obey (.oby) file. How can it be run in Obey scripts and also used in Microservices architecture?
- A. Launch GGSCI and run from the GGSCI prompt.
- B. Run it on the OS logged in as user oggadmin.
- C. Log into source or target database as user oggadmin and run script at SQL prompt.
- D. Run scripts from adminclient.
Answer: D
Explanation:
For Microservices Architecture, run Obey scripts using the adminclient.
NEW QUESTION # 71
Suppose your process stops immediately after verifying parameter syntax. What is the most likely reason?
- A. The group name is spelled wrong
- B. Oracle GoldenGate reports syntax problems
- C. The database user has incorrect permissions
- D. The CheckParams parameter is enabled
Answer: D
Explanation:
CheckParams halts after verifying parameter syntax.
NEW QUESTION # 72
You must provide credentials, like a username and password, to access the database credentials store where the actual user credentials are stored. The credential store is preferable to using the database username and password in the commands or the parameter file. What may you use rather than a user ID and password, in the parameter file, for the Extract or Replicat to provide credentials for access to the source or target database?
- A. UserReplicationUser
- B. Oracle SID
- C. Single Sign On
- D. UserIDAlias
Answer: D
Explanation:
You can use UserIDAlias in the parameter file to reference credentials securely stored in the Oracle GoldenGate credential store, avoiding plain-text usernames and passwords.
NEW QUESTION # 73
Initial Load is a process of extracting data records from the source database and loading those records onto the target database. There are many advantages in using GoldenGate to obtain the data from the source and load the records onto the target. What describes the advantage of continuing to make data changes on the source database while loading data onto the target database?
- A. Enable Extract to indicate in the trail file when initial load commenced.
- B. Enable the LGWR to indicate in the transaction log when initial load commenced.
- C. Enable change delivery to handle collisions with initial load.
- D. Enable data changes on source tables without locking tables.
Answer: D
Explanation:
"Oracle GoldenGate can perform a one-time initial load while the source tables remain online and active. You do not need to lock the source tables during the load. Oracle GoldenGate tracks ongoing changes with Change Data Capture (CDC) and applies them after the load completes."
NEW QUESTION # 74
If multiple GoldenGate processes are accessing a set of trail files, which process should include the PURGEOLDEXTRACTS parameter to trigger trail file clean-up?
- A. Manager
- B. Extract
- C. Extract and Replicat
- D. Replicat
Answer: A
Explanation:
The PURGEOLDEXTRACTS parameter should be configured in the Manager (MGR) process, as it is responsible for monitoring trail file usage across GoldenGate processes and safely deleting files no longer needed by any Extract or Replicat.
NEW QUESTION # 75
Which parameter gives more accurate timing for lag statistics?
- A. CacheMgr
- B. TCPSourceTimer
- C. DynamicResolution
Answer: B
Explanation:
TCPSourceTimer improves lag timing accuracy.
NEW QUESTION # 76
What is a DiscardFile not used for?
- A. Replacing a trail file on the target system
- B. File for rejected Extract data
- C. File for rejected Replicat data
Answer: A
Explanation:
DiscardFile does not replace trail files; it logs rejected records.
NEW QUESTION # 77
Where can Oracle GoldenGate software be downloaded officially?
- A. OTN or http://edelivery.oracle.com
- B. Oracle Cloud Marketplace
- C. Oracle Database Utilities
- D. My Oracle Support
Answer: A
NEW QUESTION # 78
Which is an invalid combination for EVENTACTIONS with options?
- A. EVENTACTIONS (CHECKPOINT BOTH, IGNORE)
- B. EVENTACTIONS (CHECKPOINT BEFORE, ABORT)
- C. EVENTACTIONS (CHECKPOINT BOTH, STOP)
- D. EVENTACTIONS (CHECKPOINT AFTER, ABORT)
Answer: A
Explanation:
The combination CHECKPOINT BOTH with IGNORE is invalid because IGNORE tells Replicat to skip the transaction, while CHECKPOINT BOTH implies a complete apply and checkpoint - which contradicts the action of ignoring the transaction.
NEW QUESTION # 79
Using adminclient, you can add a data pump Extract using the command: "ADD EXTRACT <ext name>, EXTTRAILSOURCE <trail file>"
- A. TRUE
- B. FALSE
Answer: B
Explanation:
adminclient doesn't support EXTTRAILSOURCE; it's not used in Extract setup.
NEW QUESTION # 80
Which of the following is not an initial load method in Oracle GoldenGate?
- A. File to database utility
- B. File to Replicat
- C. Direct load
- D. SQL*Net Load
Answer: D
Explanation:
File to Replicat, File to database utility, Direct load & Direct bulk load (via SQL*Loader API)
NEW QUESTION # 81
The filter clause provides the ability to include or exclude data to process. What is true with this filter clause: Filter (ON UPDATE, ON DELETE, @Compute(PRODUCT_PRICE * PRODUCT_AMOUNT) > 10000)
- A. Data processing will exclude rows for delete if (PRODUCT_PRICE * PRODUCT_AMOUNT) is not greater than 10000
- B. Data processing will exclude rows for update if (PRODUCT_PRICE * PRODUCT_AMOUNT) is not greater than 10000
- C. Data processing will include rows for insert if (PRODUCT_PRICE * PRODUCT_AMOUNT) is not greater than 10000
- D. Data processing will include rows for delete if (PRODUCT_PRICE * PRODUCT_AMOUNT) is not greater than 10000
Answer: B
Explanation:
The FILTER clause with @Compute and ON UPDATE, ON DELETE includes only those rows where the computed value is greater than 10000. If not, the row is excluded from processing - specifically for UPDATE and DELETE operations.
NEW QUESTION # 82
To identify a bottleneck, where should monitoring begin?
- A. From the target back to the source
- B. From the source to the target
Answer: A
Explanation:
Start lag analysis from the target to trace bottlenecks.
NEW QUESTION # 83
......
Pass Oracle 1Z0-947 Exam Info and Free Practice Test: https://realtest.free4torrent.com/1Z0-947-valid-dumps-torrent.html