Free 300-810 Exam Study Guide for the NEW [Jun-2026] Dumps Test Engine [Q92-Q116]

Share

Free 300-810 Exam Study Guide for the NEW [Jun-2026] Dumps Test Engine

300-810 PDF Dumps Extremely Quick Way Of Preparation


Candidates who pass the Cisco 300-810 exam will demonstrate their ability to implement and manage Cisco Collaboration Applications effectively. Implementing Cisco Collaboration Applications certification validates that a candidate has the knowledge and skills required to design, configure, and troubleshoot Cisco collaboration solutions in an enterprise environment.


Cisco 300-810 exam is designed to test the knowledge and skills of the candidates in implementing Cisco Collaboration Applications. 300-810 exam is a part of the Cisco Certified Network Professional (CCNP) Collaboration certification program. Implementing Cisco Collaboration Applications certification program focuses on the skills and knowledge required to design, implement, configure, and troubleshoot Cisco Collaboration solutions. The 300-810 exam is one of the concentration exams required to obtain the CCNP Collaboration certification.

 

NEW QUESTION # 92

Refer to the exhibit. After receiving a new desk phone, the Jabber user can no longer make calls via phone control. The help desk collected the user's Jabber problem report and verified that they the correct Cisco UCM CTI permissions. Which configuration must be changed to correct this issue?

  • A. Verify that the user's desk phone device is listed as a controlled device in the Cisco UCM end user configuration
  • B. Verify that the desk phone device has Allow Control of Device from CTI enabled.
  • C. Verify that the device line configuration has Allow Control of Device from CTI enabled.
  • D. Verify that the Cisco UCM service profile has Cisco UCM CTI servers configured.

Answer: B


NEW QUESTION # 93
Refer to the exhibit.

Troubleshooting an internal Jabber login issue and you see this logging snippet from the Jabber PRT file. You already checked that the Jabber client has a connection to the correct DNS server. Which DNS record is missing for service discovery of Cisco Unified Communications Manager for the login process to proceed further?

  • A. SRV record _cuplogin._tcp.example.com
  • B. A record _cuplogin._tcp.example.com
  • C. A record for the Cisco Unified Communications Manager
  • D. SRV record _cisco-uds._tcp.example.com

Answer: A


NEW QUESTION # 94
An engineer must configure a test user mailbox in a newly deployed Cisco Unity Express module. Which console command set reflects the correct configuration in this scenario?

  • A. Option C
  • B. Option D
  • C. Option A
  • D. Option B

Answer: C


NEW QUESTION # 95
Which type of protocol is OAuth 2.0?

  • A. authentication
  • B. authorization
  • C. accounting
  • D. single sign-on

Answer: B


NEW QUESTION # 96
Which MFA solution can be integrated with Cisco Jabber via SAML and used independently of an ldP?

  • A. Microsoft ADFS
  • B. PingFederate
  • C. Okta
  • D. Cisco DUO

Answer: D

Explanation:
This option is the correct MFA solution that can be integrated with Cisco Jabber via SAML and used independently of an IdP. Cisco DUO is a cloud-based MFA service that provides an additional layer of security for SAML SSO. Cisco DUO can be configured as a SAML IdP proxy that sits between Cisco Jabber and the actual IdP, or as a standalone SAML IdP that does not require another IdP. Cisco DUO supports various authentication methods, such as push notifications, phone calls, SMS messages, or hardware tokens.
References:
* https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_6/cjab_b_planning-guide-cisco-jabber-1
* https://duo.com/docs/sso-cisco-jabber


NEW QUESTION # 97
A user is experiencing video quality issues and wants to verify packet loss, jiter, and codecs in use. Where can the user find this information in the Webex App for Windows during a call?

  • A. Help, Health Checker, and press Status in the Webex App or Ctrl+Shit+Alt+S
  • B. Help, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D
  • C. Settings, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D
  • D. Settings, Status, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+S

Answer: D

Explanation:
Explanation
This option is the correct way to find information about packet loss, jitter, and codecs in use in the Webex App for Windows during a call. The Settings menu allows users to access various options and preferences for the Webex App, including the Status option. The Status option shows the current network status and quality of service for the app. Users can press Diagnostics or use the keyboard shortcut Ctrl+Shift+Alt+S to open a detailed report of the call statistics, including packet loss, jitter, and codecs in use for audio and video.
References:
https://help.webex.com/en-us/article/np8ugnq/Webex-App-Status
https://help.webex.com/en-us/article/np8ugnq/Webex-App-Status#id_136835


NEW QUESTION # 98
Drag and drop the SAML components from the left onto the descriptions on the right.

Answer:

Explanation:

Explanation:
Graphical user interface Description automatically generated with medium confidence


NEW QUESTION # 99
Refer to the exhibit.

An organization is moving from on-premise Exchange to Microsoft Office 365 for email and calendaring. The administrator would like to maintain meeting presence functionality in Jabber clients connected to Cisco IM and Presence after this move. Office 365 certificates must be installed to accomplish this. Which two trust stores should these certificates be uploaded to on Cisco IM and Presence? (Choose two.)

  • A. cup-xmpp- trust
  • B. tomcat-trust
  • C. xmpp-fed-trust
  • D. xmpp- rust
  • E. cup-trust

Answer: A,E


NEW QUESTION # 100

Refer to the exhibit An engineer is troubleshooting a Cisco Jabber issue in Cisco UCM and validates that these configurations are correctly configured Cisco UCM Service discovery Cisco UCM User authentication *SOAP login Which protocol interactions between Cisco UCM and the Cisco IM and Presence servers must be validated next?

  • A. LDAP
  • B. XMPP
  • C. SAML
  • D. SCCP

Answer: A


NEW QUESTION # 101
Refer to the exhibit.

Users report that they cannot see the Chat Rooms icon on their Cisco Jabber clients. This feature works without issue in the lab. An engineer reviews the Cisco IM&P and Jabber configuration and finds that the jabber-config.xml file is configured properly to support this feature. Which activity should be performed on the IM&P server to resolve this issue?

  • A. Restart XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Control Center - Network Services.
  • B. Restart Cisco XCP Message Archiver in Cisco Unified Serviceability > Tools > Control Center - Feature Services.
  • C. Activate Cisco XCP Connection Manager in Cisco Unified Serviceability > Tools > Service Activation.
  • D. Activate XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Service Activation.

Answer: D


NEW QUESTION # 102
Refer to the exhibit.

A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM&P server is in Failed Over state. Which two actions should be performed to bring the system back to operational state and to prevent future occurrences? (Choose two.)

  • A. Confirm that both IM&P servers are configured in the Presence Redundancy Group configuration pane.
  • B. Perform a restart of the IM&P primary server to force fallback.
  • C. Click the Fallback button in the Server Action pane.
  • D. Advise all users to re-login to their Jabber clients.
  • E. Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.

Answer: A,C


NEW QUESTION # 103
Refer to the exhibit.

A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)

  • A. ccn subsystem sip
    mwi sip outcall
  • B. sip-ua
    no mwi-server
    mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited
  • C. ccn subsystem sip
    mwi sub-notify
  • D. ccn subsystem sip
    mwi envelop-info
  • E. sip-ua
    no mwi-server
    mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp
  • F. sip-ua
    no mwi-server
    mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify

Answer: D,E


NEW QUESTION # 104

Refer to the exhibit. An engineer is troubleshooting an issue with Cisco Jabber for Windows The end-user reports that Cisco Jabber cannot be used to control a Cisco 8841 IP Phone The phone appears in the Jabber client, but there is a red x on the icon for the phone Which end-user option resolves the issue?

  • A. Standard CTI Allow Call Monitoring
  • B. Standard CTI Allow Reception of SRTP Key Material
  • C. Standard CTI Allow Calling Number Modification
  • D. Standard CTI Allow Control of Phones Supporting Rollover Mode

Answer: D


NEW QUESTION # 105
A jabber user reports that they receive pop-up windows warring about untrusted certificates when they attempt to log in to jabber without receiving the certificate warnings. Which two actions resolve this issue? (Choose two.)

  • A. Add the certificates to the client machine's local certificate store or keychain
  • B. Reinstall the Jabber client using the /quiet option
  • C. Replace self-signed certificates with certificates signed by a CA
  • D. Move the user to a different Presence Redundancy Group
  • E. Configure Jabber with the INVALID_CERTIFICATE_BEHAVIOR option set to
    "RejectAndNotify."

Answer: A,C


NEW QUESTION # 106

Refer to the exhibit Users complain that the message waiting light on the IP phone does not light up when receiving a new voicemail With which codec must the engineer configure a dial peer on Cisco UCME for MW1 traffic to resolve this issue?

  • A. G.711ulaw
  • B. G.729r8
  • C. G.711alaw
  • D. G.729ar8

Answer: A


NEW QUESTION # 107
An engineer has completed Cisco TMS setup. Which must be set up in Cisco TMS conference call routing for scheduling purposes?

  • A. IP port
  • B. IP DNS
  • C. IP DHCP
  • D. IP zones

Answer: D


NEW QUESTION # 108
Refer to the exhibit.

Which two steps resolve the "Users with Duplicate User IDs" message? (Choose two.)

  • A. Unassign a user from one of the clusters when the same user is assigned to two different clusters.
  • B. Rename the directory URI value for one of the users to ensure that there is no duplication.
  • C. Rename the User ID value for one user if different users on different clusters have the same User ID assigned.
  • D. Delete the user ID for the duplicate user ID.
  • E. Assign the duplicate user to the secondary Cisco IM and Presence node.

Answer: A,C


NEW QUESTION # 109
Refer to the exhibit. An engineer discovers that many international calls were made from Cisco Unity Connection. The engineer examines the default transfer Restriction Patterns. Which action prevents a voicemail user from transferring calls to international destinations?

  • A. Click Add New, enter the 9011* pattern in a new field, and click Save.
  • B. Click Add New and enter the 9011* pattern in a new field. Select Blocked and click Save.
  • C. Modify the 9+* pattern by using the 9011* pattern and click Save.
  • D. For the +" pattern, select Blocked and click Save.

Answer: B


NEW QUESTION # 110
Refer to the exhibit.

Users report that they cannot see the Chat Rooms icon on their Cisco Jabber clients. This feature works without issue in the lab. An engineer reviews the Cisco IM&P and Jabber configuration and finds that the jabber-config.xml file is configured properly to support this feature. Which activity should be performed on the IM&P server to resolve this issue?

  • A. Restart XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Control Center - Network Services.
  • B. Restart Cisco XCP Message Archiver in Cisco Unified Serviceability > Tools > Control Center - Feature Services.
  • C. Activate Cisco XCP Connection Manager in Cisco Unified Serviceability > Tools > Service Activation.
  • D. Activate XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Service Activation.

Answer: D


NEW QUESTION # 111
Secure XMPP communication is required for XMPP federation with external domains and the Cisco IM and Presence. Which certificate is used for XMPP interdomain federation when connecting to an externally federated domain?

  • A. cup
  • B. cup-xmpp-s2s
  • C. Tomcat
  • D. cup-xmpp

Answer: B


NEW QUESTION # 112

Refer to the exhibit A collaboration engineer is troubleshooting an issue with MWIs not working for SIP-integrated Cisco Unity Connection users on Cisco UCM Calls to the Cisco Unity Connection work. but MWIs do not light This problem affects all users on the system Which action resolves the issue?

  • A. Configure the Message Waiting Numbers on Cisco UCM
  • B. Modify the SIP Trunk Security Profile on Cisco UCM.
  • C. Increase the Delay Between Requests timer on Cisco Unity Connection
  • D. Assign a Calling Search Space to the SIP Trunk on Cisco UCM

Answer: A

Explanation:
The scenario describes an issue where Message Waiting Indicators (MWIs) aren't lighting up for SIP-integrated Cisco Unity Connection users, even though calls reach voicemail. This points towards a configuration problem with MWI notifications on Cisco UCM.
* A. Modify the SIP Trunk Security Profile on Cisco UCM: While SIP trunk security is important, it likely wouldn't affect MWI functionality in this case.
* B. Increase the Delay Between Requests timer on Cisco Unity Connection: This setting might be used for other purposes but wouldn't directly address MWI notification issues on Cisco UCM.
* C. Assign a Calling Search Space to the SIP Trunk on Cisco UCM: Calling Search Space defines call routing, not MWI notification.


NEW QUESTION # 113
Refer to the exhibit.

Which end-user option can resolve this issue?

  • A. Standard CTI Allow Reception of SRTP Key Material
  • B. Standard CTI Allow Call Monitoring
  • C. Standard CTI Allow Calling Number Modification
  • D. Standard CTI Allow Control of Phones Supporting Rollover Mode

Answer: A


NEW QUESTION # 114
A collaboration engineer is troubleshooting an issue with Cisco Unity Connection and Cisco UCM.
Users report that outside callers can leave messages and that MWIs work. However, pressing the voicemail key on the phone does not connect the user to Unity Connection. Which action resolves the issue?

  • A. Assign the proper Significant Digits setting on the Cisco UCM SIP trunk to Cisco Unity Connection.
  • B. Click the Reset button on the Cisco Unity Connection Port Group page.
  • C. Assign the proper calling search space to the line or to the phone in Cisco UCM.
  • D. Assign the proper calling search space to the voicemail pilot in Cisco UCM.

Answer: D

Explanation:
When users press the voicemail key on their phones, Cisco Unified Communications Manager (UCM) uses the voicemail pilot configuration to route the call to Cisco Unity Connection. If the voicemail pilot has an incorrect or insufficient calling search space (CSS), the call cannot reach Unity Connection.


NEW QUESTION # 115
Collaboration engineer is troubleshooting an issue with Cisco Jabber for Windows clients Users report that they receive the error message "cannot find your services automatically. All users on the collaborate network with an on-premises Cisco IM and Presence server report this issue. Which action resolves the issue?

  • A. Add _collab-edge SRV records to the external DNS server
  • B. Add _cisco-uds and _cuplogin SRV records to the internal DNS server.
  • C. Add _cisco-uds and _cuplogin A records to the internal DNS server
  • D. Set the AUTHENTICATOR CLI argument for the Jabber clients

Answer: B


NEW QUESTION # 116
......

Enhance your career with 300-810 PDF Dumps - True Cisco Exam Questions: https://realtest.free4torrent.com/300-810-valid-dumps-torrent.html