Get 2022 Updated Free Cisco 300-625 Exam Questions & Answer
300-625 Dumps PDF and Test Engine Exam Questions
Requirements to Fulfill
Cisco 300-625 is specifically designed to assert the skills and understanding essential for working with the ever-evolving data center technologies. To get accredited, the candidates should gain the passing score in one required core exam and one of 5 concentration tests at choice. If you want to get the professional-level certificate, it is recommended to have at least 3-5 years of hands-on experience in working with implementing data center solutions along with routing and switching. It is not a strict requirement, but this level of expertise will certainly help you deal with both the qualifying exams.
3. Management and Monitoring
Weightage – 25%
In this domain, the test-takers have to demonstrate their competency in concepts like setting up the DCNM device manager, DCNM-SAN client, and licensing options. Other topics include slow-drain analysis, RBAC configuration, and SAN telemetry streaming implementation.
2. Implementation
Weightage – 35%
The second domain is an extensive one. It is focused on topics like the implementation of Fibre Channel port channels, Fibre Channel protocol services, Name service, and Cisco Fabric Services. It also checks the ability to implement FCoE, including FCoE Initialization Protocol. Besides, it also throws light on concepts like Priority flow control, Enhanced transmission selection, Data Center Bridging Exchange/Link Level Discovery Protocol. The configuration and implementation of VSAN extensions, and NPV and NPIV are involved in this module too.
NEW QUESTION 32
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID.
What is the reason why the configuration is not working?
- A. Build fabric notifications were not sent to the other switches.
- B. Static domain IDs apply only after a switch is rebooted.
- C. Domain manager fast restart is not enabled on the switch.
- D. The disruptive keyword was not used on the command.
Answer: B
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 33
Refer to the exhibit.
What is the result of merging the fabric?
- A. The merge is invalid.
- B. The merged fabric IVR VSAN topology is set to activate.
- C. The merged fabric contains only service group Group1.
- D. The merged fabric has NAT enabled.
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 34
Refer to the exhibit.
Which command is used to determine which switch has the lock?
- A. show flogi database
- B. show zone status
- C. show zoneset active
- D. show fcs ie vsan
Answer: B
NEW QUESTION 35
Which statement accurately describes the result of disabling restrictions on oversubscription ratios on Cisco MDS 9000 Series Fibre Channel switching modules?
- A. The bandwidth allocation of the shared ports is equal to the lowest configured bandwidth.
- B. The bandwidth allocated to shared ports is proportionate to the configured speed of the ports.
- C. A port-group can contain a single port only.
- D. QoS can be configured.
Answer: B
NEW QUESTION 36
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. force
- C. commit
- D. clear
Answer: D
NEW QUESTION 37
Refer to the exhibit.
An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
- C. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
Answer: C
NEW QUESTION 38
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN
10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# port-security activate vsan 10
- B. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48 - C. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - D. switch(config)# feature port-security
switch(config)# port-security activate vsan 10
Answer: A
Explanation:
Section: Management and Monitoring
NEW QUESTION 39
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch.
Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured under the VSAN policy allow.
- B. permit vsan 1-1000 must be configured under the VSAN policy deny.
- C. permit vsan 1-1000 must be configured as rule 1.
- D. permit vsan 1-1000 must be configured as rule 5.
Answer: B
NEW QUESTION 40
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Increase the reset timeout.
- B. Disable PMTU discovery.
- C. Increase the send buffer size to 15000 KB.
- D. Enable selective acknowledgment.
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 41
A storage administrator is connecting two previously configured switches to make a single fabric.
When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch.
Which command should the administrator use to allow these switches to work together?
- A. zoneset import interface fc1/1 vsan 10
- B. zoneset copy active-zoneset full-zoneset
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
Answer: A
NEW QUESTION 42
What does an unlicensed DCNM SAN fail to display?
- A. events and fault management
- B. Fibre Channel, FCoE, and iSCSI topologies
- C. historical performance monitoring
- D. real-time performance monitoring
Answer: C
Explanation:
Section: Management and Monitoring
NEW QUESTION 43
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two,)
- A. The engineer can choose what will be the administrator account
- B. The secure password standard is required.
- C. The engineer does not have the choice to enable or disable full roneset distribution
- D. The engineer can configure the default zone policy.
- E. The engineer can configure the default switch port trunK mode
Answer: B,D
NEW QUESTION 44
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. E Port connectivity to the core switch
- B. local switching of east-west traffic
- C. Cisco Fabric Services distribution over Fibre Channel
- D. Dynamic Port VSAN Membership
Answer: C
NEW QUESTION 45
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset import interface fc1/1 vsan 10
- B. zoneset copy active-zoneset full-zoneset
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
Answer: A
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 46
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. FCoE is already enabled on a Cisco MDS switch.
- B. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
- C. The QoS policy must be identical to other Cisco FCoE switches in the network.
- D. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- E. On the Cisco MDS, the MTU is set equal to 2112.
Answer: A,C
Explanation:
Section: Implementation
NEW QUESTION 47
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Answer:
Explanation:
NEW QUESTION 48
Refer to the exhibit. The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work.
Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2
Answer: C
NEW QUESTION 49
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were derived on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_2/npv.html
NEW QUESTION 50
Refer to the exhibit. What is the result of merging the fabric?
- A. The merge is invalid.
- B. The merged fabric IVR VSAN topology is set to activate.
- C. The merged fabric contains only service group Group1.
- D. The merged fabric has NAT enabled.
Answer: C
NEW QUESTION 51
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?
- A. management IP address
- B. active NTP server
- C. administrator password
- D. active default gateway
Answer: C
NEW QUESTION 52
......
Verified 300-625 exam dumps Q&As with Correct 72 Questions and Answers: https://realtest.free4torrent.com/300-625-valid-dumps-torrent.html