Get Ready to Pass the JN0-636 exam Right Now Using Our JNCIP-SEC Exam Package
Enhance Your Career With Available Preparation Guide for JN0-636 Exam
The JN0-636 exam is a comprehensive exam that covers a wide range of security topics, including advanced security policies, intrusion prevention and detection, security services, virtual private networks (VPNs), and more. JN0-636 exam is designed to test the candidate's ability to design, implement, configure, and troubleshoot advanced security solutions using Juniper Networks technologies. Successful candidates will have the knowledge and skills necessary to implement and manage complex security environments, and will be recognized as experts in the field of network security. The JN0-636 certification is a valuable credential for security professionals who want to advance their careers and demonstrate their expertise in Juniper Networks security technologies.
To prepare for the JN0-636 certification exam, candidates are encouraged to take Juniper Networks' official training courses and study the exam objectives thoroughly. They should also gain hands-on experience with Juniper Networks security solutions to ensure they have the practical skills necessary to pass the exam. Passing the JN0-636 certification exam is a significant achievement for security professionals and can open up new career opportunities in the field of network security.
NEW QUESTION # 71
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain. However, the traffic between two hosts in the same broadcast domain are not matching any security policies.
Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to security switching mode.
- C. You must change the global mode to switching mode.
- D. You must change the global mode to transparent bridge mode.
Answer: A
NEW QUESTION # 72
Exhibit
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
- A. The infected host score is globally set above a threat level of 5.
- B. The C&C events are false positives.
- C. The infected host score is globally set bellow a threat level of 5.
- D. The ETI events are false positives.
Answer: D
NEW QUESTION # 73
You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the "Policy is out of sync between RE and PFE <SPU-name(s)>." error.
Which command would be used to solve the problem?
- A. request service-deployment
- B. request security polices check
- C. restart security-intelligence
- D. request security polices resync
Answer: D
NEW QUESTION # 74
Exhibit
You have recently configured Adaptive Threat Profiling and notice 20 IP address entries in the monitoring section of the Juniper ATP Cloud portal that do not match the number of entries locally on the SRX Series device, as shown in the exhibit.
What is the correct action to solve this problem on the SRX device?
- A. Flush the DNS cache on the SRX device.
- B. Refresh the feed in ATP Cloud.
- C. Force a manual download of the Proxy__Nodes feed.
- D. You must configure the DAE in a security policy on the SRX device.
Answer: A
NEW QUESTION # 75
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to security switching mode.
- C. You must change the global mode to switching mode.
- D. You must change the global mode to transparent bridge mode.
Answer: A
NEW QUESTION # 76
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)
- A. This feature is supported on high-end SRX Series devices only.
- B. This feature captures ICMP traffic to and from the SRX Series device.
- C. This feature does not capture transit traffic.
- D. This feature is supported on both branch and high-end SRX Series devices.
Answer: C,D
Explanation:
https://forums.juniper.net/t5/Ethernet-Switching/monitor-traffic-interface/td-p/462528
NEW QUESTION # 77
Exhibit
You configure a traceoptions file called radius on your returns the output shown in the exhibit What is the source of the problem?
- A. The RADIUS server suffered a hardware failure.
- B. The authentication order is misconfigured.
- C. The RADIUS server IP address is unreachable.
- D. An incorrect password is being used.
Answer: A
NEW QUESTION # 78
You want to use selective stateless packet-based forwarding based on the source address. In this scenario, which command will allow traffic to bypass the SRX Series device flow daemon?
- A. set firewall family inet filter bypass__f lowd term t1 then packet--mode
- B. set firewall family inet filter bypass_flowd term t1 then routing-instance stateless
- C. set firewall family inet filter bypaa3_flowd term t1 then skip--services accept
- D. set firewall family inet filter bypas3_flowd term t1 then virtual-channel stateless
Answer: C
NEW QUESTION # 79
Click the Exhibit button.
user@key-server> show security group-vpn server ike security-
associations Index State Initiator cookie Responder cookie Mode Remote
Address
97 UP bb224408940cc5d 435b9404284083c2 Main 192.168.11.1
98 UP 242c840089404d15 ab19284089408ba8 Main 192.168.11.2
user@key-server> show security group-vpn server ipsec security-
associations Group:
group-1, Group Id: 1
Total IPsec SAs: 1
IPsec SA Algorithm SPI Lifetime
group-l-sa ESP:3des/shal 1343991c 2736
Group: group-2, Group id: 2
Total IPsec SAs: 1
IPsec SA Algorithm SPI Lifetime
group-2-sa ESP:3des/shal 13be9e9 2741
Group: group-3, Group Id: 3
Total IPsec SAs: 1
IPsec SA Algorithm SPI Lifetime
group-3-sa ESP:3des/shal 20709057 2741
Group: group-4, Group Id: 4
Total IPsec SAs: 1
IPsec SA Algorithm SPI Lifetime
group-4-sa ESP:3des/shal 5111c2e1 2741
Which statement is correct regarding the outputs shown in the exhibit?
- A. No established peer is in the group VPNs.
- B. Two established peers are in the group VPNs.
- C. Four established peers are in the group VPNs.
- D. One established peer is in the group VPNs.
Answer: B
NEW QUESTION # 80
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
- B. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- C. Juniper Networks will not investigate false positives generated by this custom feed.
- D. Juniper Networks will investigate false positives generated by this custom feed.
Answer: A,C
Explanation:
https://www.juniper.net/documentation/en_US/junos-space18.1/policy-enforcer/topics/task/configuration/junos-space-policyenforcer-custom-feeds-infected-host-configure.html
NEW QUESTION # 81
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT46
- B. persistent NAT
- C. DS-Lite
- D. NAT64
Answer: D
NEW QUESTION # 82
When would you use the port-overloading-factor 1 setting?
- A. to set the maximum port-overloading capacity to 65,536
- B. to enable the port-overloading
- C. to map ports with 1:1 ratio for port-overloading
- D. to disable the port-overloading
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration- statement/security-edit-port-overloading-interface-source-nat.html
NEW QUESTION # 83
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the last packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. This is the first packet in the session.
- D. The SRX Series device is performing both source and destination NAT on this session.
Answer: A,D
NEW QUESTION # 84
Which two statements are correct about the output shown in the exhibit? (Choose two.)
- A. The packet is part of an existing session.
- B. The packet is explicitly rejected.
- C. The packet is part of a new session.
- D. The packet is silently discarded.
Answer: B,C
NEW QUESTION # 85
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- C. This custom block list feed will be used after the Juniper Seclntel block list feed.
- D. This custom block list feed will be used before the Juniper Seclntel
Answer: C
NEW QUESTION # 86
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: B
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/ref/statement/family-ethernet-switching-edit-interfaces-qfx-series.html#statement-name-statement__d26608e73
NEW QUESTION # 87
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- C. This custom block list feed will be used after the Juniper Seclntel block list feed.
- D. This custom block list feed will be used before the Juniper Seclntel
Answer: C
NEW QUESTION # 88
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
- B. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- C. The data that traverses the ge-0/070 interface is secured by a secure association key.
- D. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
Answer: A,D
NEW QUESTION # 89
Which two statements about AppQoS are true? (Choose two.)
- A. AppQoS supports rate limiting.
- B. AppQoS remarking supersedes interface remarking.
- C. AppQoS supports forwarding class assignment.
- D. AppQoS supports bandwidth reservation.
Answer: A,C
NEW QUESTION # 90
Exhibit
You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.) A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION # 91
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- C. A firewall is blocking HTTPS on fxp0
- D. The fxp0 IP address is not routable
Answer: B
NEW QUESTION # 92
SRX Series device enrollment with Policy Enforcer fails. To debug further, the user issues the following command show configuration services security--intelligence url
https://cloudfeeds.argon.juniperaecurity.net/api/manifeat.xml and receives the following output:
What is the problem in this scenario?
- A. The device is directly enrolled with Juniper ATP Cloud.
- B. Junos Space does not have matching schema based on the
- C. The SRX Series device does not have a valid license.
- D. The device is already enrolled with Policy Enforcer.
Answer: C
NEW QUESTION # 93
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"?
(Choose two.)
- A. CAK is used for encryption and decryption of the MACsec session.
- B. SAK is successfully generated using this key.
- C. SAK is not generated using this key.
- D. CAK is not used for encryption and decryption of the MACsec session.
Answer: A,C
NEW QUESTION # 94
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
- B. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- C. Juniper Networks will not investigate false positives generated by this custom feed.
- D. Juniper Networks will investigate false positives generated by this custom feed.
Answer: A,C
NEW QUESTION # 95
Exhibit
You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?
- A. The remote gateway address for the IPsec tunnel is 10.20.20.2
- B. NAT is being used to change the source address of outgoing packets
- C. The session information indicates that the IPsec tunnel has not been established
- D. The local gateway address for the IPsec tunnel is 10.20.20.2
Answer: A
NEW QUESTION # 96
......
Get Special Discount Offer of JN0-636 Certification Exam Sample Questions and Answers: https://realtest.free4torrent.com/JN0-636-valid-dumps-torrent.html