Unique Top-selling NACE-CIP2-001 Exams - New 2022 NACE Pratice Exam
CIP Level 2 Dumps NACE-CIP2-001 Exam for Full Questions - Exam Study Guide
NEW QUESTION 40
Antifouling coatings are regulated by international treaties.
- A. True
- B. False
Answer: A
NEW QUESTION 41
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Re-create the reports as not much was going on during night shift anyway
- B. Plainly state in your report that they are missing
- C. Use creative writing to cover over the fact they are missing
- D. Do not complete your report until they can be found
Answer: B
NEW QUESTION 42
You should bulk store coatings containing isocyanates
- A. in a heated warehouse.
- B. in a well ventilated area separate from the work place.
- C. in a refrigerated warehouses
- D. wherever it is convenient
Answer: B
NEW QUESTION 43
When observing fabrication defects the NACE Inspector should:
- A. Write an NCR and call the fabricator
- B. Consult the specification to determine how they should be treated
- C. Stop the job immediately
- D. Require they be corrected prior to coating
Answer: B
NEW QUESTION 44
Coating Surveys are legally required:
- A. On commercial marine vessels and offshore platforms
- B. On food and beverage vessels and can linings
- C. On high pressure gas lines and fireproofed structures
- D. On water tanks and potable water pipelines
Answer: A
NEW QUESTION 45
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Organic coatings
- B. Inorganic Coatings
- C. Polyurea
- D. Latex
Answer: B
NEW QUESTION 46
NACE Level 2 Inspectors have been authorized to perform:
- A. Visual inspection, Non-Destructive and Destructive testing
- B. Visual inspection only
- C. All types of inspection without supervision
- D. Visual inspection and Non-destructive testing
Answer: A
NEW QUESTION 47
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. coating type.
- B. type of dehumidification equipment (refrigerant or desiccant).
- C. manufacturer of the equipment.
- D. time of the year (winter/summer).
Answer: A
NEW QUESTION 48
When ASIN D 3363 is specified the Inspector must:
- A. Record the percentage of failure
- B. Use the correct solvent
- C. Record the two end points identified in the standard
- D. Record the highest value attained
Answer: C
NEW QUESTION 49
You can use magnifiers to examine all of the following EXCEPT
- A. Blisters
- B. Surface cleanliness
- C. Mill scale
- D. Surface profile
Answer: B
NEW QUESTION 50
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 35 single rubs with a saturated cloth.
- B. 25 double rubs with a saturated cloth.
- C. 25 single rubs with a saturated cloth.
- D. 50 double rubs with a saturated cloth.
Answer: D
NEW QUESTION 51
You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?
- A. SP 1 followed by SP 3
- B. SP 1 followed by acid etching
- C. SP 1 followed by SP 2
- D. SP 1 followed by caustic etching
Answer: C
NEW QUESTION 52
NACE Standards include:
- A. Material Requirements
- B. a) only
- C. Standard Practices
- D. a) & b)
Answer: D
NEW QUESTION 53
Thermal Spray coatings provide:
- A. Thermal protection
- B. Barrier protection
- C. Inhibitive protection
- D. Sacrificial protection
Answer: D
NEW QUESTION 54
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Redo the pre-cleaning based on the other inspectors results
- B. Advise your QC Manager to change the ITP to the use of the salt smart meter
- C. Advise the other inspector he is using an incorrect method
- D. Review the specification with the other inspector to see what method was specified
Answer: D
NEW QUESTION 55
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. allow the contractor to guarantee the completion date.
- C. avoid repetitive blasting/coating operations.
- D. reduce the possibility of missing the recoat window.
Answer: A
NEW QUESTION 56
You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Use a generally accepted industry standard and to take readings
- C. Refuse to take readings until an is in place
- D. Develop your own methodology and proceed take the readings
Answer: B
NEW QUESTION 57
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Ultra Sonic DFT Gauge
- B. Tooke Gauge
- C. Magnetic Gauge
- D. Eddy Current Gauge
Answer: B
NEW QUESTION 58
The cost of qualified Coating Inspection is normally offset by:
- A. Lower Safety Enforcement Costs
- B. Lower Supervision Costs
- C. Lower Application Costs
- D. Lower Coating Life Cycle Costs
Answer: D
NEW QUESTION 59
......
Best way to practice test for NACE NACE-CIP2-001: https://realtest.free4torrent.com/NACE-CIP2-001-valid-dumps-torrent.html