Updated Oct-2023 Test Engine to Practice OSP-002 Test Questions
OSP-002 Real Exam Questions Test Engine Dumps Training With 170 Questions
The OSP-002 exam is a comprehensive exam that covers various aspects of OSP design, including copper and fiber optic cabling, wireless infrastructure, and underground and aerial construction. OSP-002 exam also includes topics such as safety, codes and standards, project management, and documentation.
NEW QUESTION # 23
How much untwist is allowed on Cat 5/5e/6 pairs at a punchdown block to maintain specified performance?
- A. 1/4 inch (6 mm)
- B. 1/2 inch (13 mm)
- C. 1 inch (25 mm)
- D. 2 inches (50 mm)
Answer: B
NEW QUESTION # 24
Singlemode fiber has a __________ light-carrying core than multimode fiber.
- A. Larger
- B. Smaller
- C. Same size
Answer: B
NEW QUESTION # 25
Singlemode fiber systems covering long distances and using DWDM use \_\_\_\_\_\_\_\_\_\_ sources.
- A. LED
- B. DFB laser
- C. VCSEL
- D. F-P laser
Answer: B
NEW QUESTION # 26
Multiple Response: Identify one or more choices that best complete the statement or answer the question.
The bandwidth and distance capability of optical fiber means that __________. (choose all that apply)
- A. Fewer cables are needed
- B. Less maintenance is required
- C. Less power is consumed by the network
- D. Fewer repeaters are needed
Answer: A,B,C,D
NEW QUESTION # 27
An older fiber design with a 50/125 micron core is now being used in cabling systems because it___________.
- A. Costs half as much as other multimode fibers
- B. Has a higher bandwidth with laser sources which gives more distance capability with gigabit (and above) networks
- C. Excess supplies are currently available from the far east
- D. Can be cabled in more compact cable designs
Answer: B
NEW QUESTION # 28
Which type of dispersion affects singlemode fiber as well as multimode fiber?
- A. Differential
- B. Chromatic
- C. Polarization mode
- D. Modal
Answer: B
NEW QUESTION # 29
Cable plant loss should be estimated during the \_\_\_\_\_\_ phase.
- A. Troubleshooting
- B. Testing
- C. Design
- D. Installation
Answer: C
NEW QUESTION # 30
Below is the color code for _________________.
(Colors from left: 1-8: Blue stripe, Blue, Orange Stripe, Orange, Green Stripe, Green, Brown Stripe, Brown)
- A. Punchdown blocks
- B. TIA 568B Jack
- C. TIA 568A Jack
Answer: A
NEW QUESTION # 31
FDDI and Token Ring networks used a \_\_\_\_\_\_\_\_\_\_\_ architecture.
- A. Balanced
- B. Ring
- C. Star
- D. Bus
Answer: B
NEW QUESTION # 32
If you use a Cat 3 UTP jack on newer Cat 5e cable plant, the link performance will meet \_\_\_\_\_\_specs.
- A. Cat 3
- B. Cat 6
- C. Cat 5E
- D. Cat 5
Answer: A
NEW QUESTION # 33
For a cable tray installed within an ER, the RECOMMENDED access headroom is:
- A. 305 mm (12 in).
- B. 152 mm (6 in).
- C. 203 mm (8 in).
- D. 254 mm (10 in).
Answer: A
NEW QUESTION # 34
When terminating Cat 5e/6, what must be remembered to maintain the performance of the installed cable?
- A. The jacket of the cable must not be stripped back more than 3 inches
- B. Keep the pairs twisted to within 1/2 inch of the termination
- C. Do not strip insulation off the wires
- D. The punchdown tool must cut off the wires close to the end
Answer: B
NEW QUESTION # 35
What do Category 3, Category 5e and Category 6 designations mean?
- A. Flame retardance of the cable
- B. The performance level of UTP cable
- C. How well the cables are made
- D. How far the cable will work in networks
Answer: B
NEW QUESTION # 36
Armored cable is used in outside plant installations to \_\_\_\_\_\_\_\_\_\_.
- A. Increase pulling tension
- B. Conduct lightning strikes
- C. Prevent crushing and rodent damage
- D. Protect from dig-up damage
Answer: C
NEW QUESTION # 37
The diameter of an optical fiber is traditionally measured in \_\_\_\_\_\_\_\_\_\_.
- A. Nanometers
- B. Meters
- C. Millimeters
- D. Microns (micrometers)
Answer: D
NEW QUESTION # 38
The name for the latest generation Cat 6 UTP cable for use with 10 Gigabit networks is \_\_\_\_\_.
- A. Augmented Cat 6
- B. Cat 7
- C. Enhanced Cat 6
- D. Extended Cat 6
Answer: A
NEW QUESTION # 39
Prior to cable plant acceptance or system turn-up, standards require that a(n) _______ is used to test the cable plant to ensure it is within the loss budget.
- A. OTDR
- B. All of the above
- C. LSPM or OLTS (Light source and power meter, optical loss test set)
- D. Power meter
Answer: C
NEW QUESTION # 40
What is the international standard for structured cabling?
- A. IEC-0001
- B. ISO-11801
- C. ISO-9000
- D. TIA-568
Answer: B
NEW QUESTION # 41
(Choose all correct answers)
What optical fiber types are recognized in the structured cabling standards?
- A. Multimode in backbones
- B. Multimode in horizontal connections
- C. Singlemode in backbones
- D. Singlemode in horizontal connections
Answer: A,B,C
NEW QUESTION # 42
Reference cables must match the \_\_\_\_\_\_\_\_ of the cables being tested.
- A. Fiber size and connector type
- B. Connector type
- C. Fiber size and type
- D. Fiber size and loss specification
Answer: A
NEW QUESTION # 43
Outside plant cabling can be installed by \_\_\_\_\_\_\_\_\_\_.
- A. Direct burial
- B. All of the above
- C. Pulling it underground in conduit
- D. Aerial suspension
Answer: B
NEW QUESTION # 44
What is the installed cable plant from work area outlet jack to the patch panel in the telecom closet called?
- A. Permanent link
- B. Patchcord
- C. Channel
- D. Link cable
Answer: A
NEW QUESTION # 45
What is the cable from the telecom closet (room) to the work area called?
- A. Horizontal cabling
- B. Work area cable
- C. Patchcord
- D. Backbone cabling
Answer: A
NEW QUESTION # 46
......
BICSI OSP-002 exam is a valuable certification program for individuals who wish to become professional outside plant designers. OSP-002 exam covers a wide range of OSP design topics and is designed to assess a candidate's knowledge and skills in these areas. Passing the exam and obtaining the BICSI OSP certification can lead to increased career opportunities and earning potential in the OSP design industry.
OSP-002 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://realtest.free4torrent.com/OSP-002-valid-dumps-torrent.html